 |
|
||||||||
 |
|||||||||
|
|||||||||
|
|
 |
|
|
 |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||
|
|
|
Specifications |
|
General Year Built : 1995 Make : PMC, USA Main specification Material : Aluminium Yield Strength : 34.5KG/CM2(50,000 PSI) Tensile Strength : 45 KG/CM2 (65,000 PSI) Max.Coil Width : 1350MM(54”) Min.Coil width : 600MM(24”) Coil Weight : 6Ton Coil I.D : 305MM,405MM,508MM Max.Thickness : 2.0MM Min. Thickness : 0.2MM Line Speed : 152MPM (500 FPM) Line Composition 1) Uncoiler : Used 2) Coil Car : 2 Sets(Used) 3) Peeler Table : 2 Sets (Not Fabricated) 4) Pinch Roll : 2 sets (Not Fabricated) 5) Crop Shear : 2 Sets ( Not Fabricated) 6) Hydraulic Coil(Joiner) : 1 Set Capacity : Max. 0.078”/Min.0.008” Thickness of Two End : 0.16” A)Hydraulic Type B)Single Row Design C)75 HP Motor, Controls and Enclosures D)Hydraulic Controls E)PLC Controls 7) Entry 4 Roll Tension Bridle Roll Unit A) Four(4) 48” Polyurethane Coated Bridle Rolls B) Four(4) 10” Threading Rolls C) One(1) 20” Deflector Roll D) Guiding Plates for Ease of Threading E) Individual D.C.Motor and Gear Reducers for Each Bridle Roll #1 Bridle -22.4 Kw 1150 RPM #2 Bridle -22.4kw 1150 RPM #3 Bridle -44.7 kw1150 RPM #4 Bridle -44.7 kw 1150 RPM 8) 6 Hi Tension Leveller Unit A) 1.625” 6 Hi Leveler Rolls B) PLC Controlled Levelling Process C) LPGS and Local Operator Panels D) Pull –out Cassette Type 9) Exit 4 Roll Tension Bridle Roll Unit A) Four(4) 48” Polyurethane Coated Bridle Rolls B) Four(4) 10” Threading Rolls C) One(1) 20” Deflector Roll D) Guiding Plates for ease of Threading E) Individual D.C Motor and Gear Reducers For each Bridle Roll #1 Bridle-223.8KW1150 RPM #2 Bridle- 149.2KW1150 RPM #3 Bridle-93.2KW-1150RPM #4 Bridle-44.7KW-1150RPM 10) Inspection Table-1 Set (Not Fabricated) 11) Pass Line Roll- 1Set 12) Recoiler- 1 Set A) 111.9 KW 650/1950 RPM DC Drive Motor B) S.C.R Controls 13) Electrical Controls A) Operation Control and Consoles B) Auxiliary Operation Controls and Console C) Motor Controls and Enclosure D) Hydraulic Controls E) Pneumatic Controls |
|
