|
|
 |
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
66" Tension Levelling Line |
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
|
|
|
Specifications
|
|
|
66" MONARCH-STAMCO TENSION LEVELING SECTION (USED)
A. Manufacturer : STAMCO, 1993
B. Material : Galvanized, Mild Steel
C. Design : 1.5% Elongation on 16 Ga. Mild Steel
D. Elongation : 0 to 2% (1% on Maximum Yield x Maximum
Width)
E. Strip Width : 60" Maximum
F. Gauge : .018" to .080" Leveled, .105" Pass-
Through
G Yield Strength : 62,000 PSI Maximum
H. Entry Bridle Section:
1) 42" Diameter x 66" Face Rolls
2) 2 Rolls Action as Turn-Rolls
3) 2 Rolls Acting as Bridle-Rolls
I. Leveling Section:
1) 5 Cassettes, 3 over 2
2) 4-HI Type
3) 20 Degree Wrap Angle
J. Exit Bridle Section:
1) 42" Diameter x 66" Face Rolls
2) 2 Rolls
K. Drives Configuration:
1) 100 HP DC @ 1750/2000 RPM
2) 50 HP DC @ 1750/2000 RPM
3) 50 HP DC @ 1750/2000 RPM
4) 100 HP DC @ 1750/2000 RPM
L. Gear-In Speed: 250 FPM (315 FPM Over-speed with Field Weakening)
M. Electrics: Reliance Electric
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
