|
|
 |
|
|
 |
|
|
|
 |
|
|
|
Equipment No. . |
|
Manufacturer . |
|
Description . |
|
Manufactured . |
|
Drawings . |
|
Photos . |
|
|
|
|
Specifications
|
|
|
COILER / UNCOILER
General:
Year of Manufacture: 1975
Mechanical Part: Sumitomo (Japan)
Electrical Part: Mitsubishi (Japan)
These Items were used in Electrolysis Cleaning Line
Main Specification of the Line:
Production Capacity: 540,000 Ton/ Years
Operation Condition
Line Speed: Max. 500MPM
Jog Speed: 30MPMShaft Diameter
Coil Data
Thick: 0.15~2.0mm(Off Gauge: 5.1mm)
Width: 610~1,557mm
Weight: Max. 25 Ton
Inner Diameter: 508mm
Outer Diameter: Max. 1830mm/Min 900mm
Un-coiler / Payoff Reel
Type: Overhung Mandrel (Hydraulic Operation)
Tension: 300~1600Kg
Centering: +/-150mm EPC
Snubber Roll: Dia 300mm x500L (Urethane Lining)
Motor: 120Kw x 400/1600RPM DC Motor (1EA)
Motor for Support Roll: 2.2Kw x 4P AC Motor (1EA)
Un-coiler Coil Car:
Traveling Distance: 6,600mm
Traveling Speed: 10,3m/min
Up- Down Cylinder: 280Bore x 1065 Stroke
Cyclo Reducer for Travelling
Rating: 10Kw
Ratio: 1.89
Coiler / Tension Reel
Type: Segment Single gripper Hydraulic Collapsible Overhang Mandrel
Motor: 250Kw x 300/1200RPM(1EA)
Tension: 520~5200Kg
EPC Centering Range: 1150mm
Snubber Roll Dia 150 x 450L(1Ea)
Coiler Coil Car:
Cradle Roll: Dia 100 x 500L (4EA)
Traveling Length: 6875mm
Traveling Speed: 10.3/m.4MPM (2 Step-
Transmission)
Motor: 3.7Kw x 4P AC Motor (1EA)
1.25Kw x 4P AC Motor (1EA)
Off Line Shear
Cutting Thickness: 0.2~5.1mm
Cutting Width: 610~1557mm
Hydraulic Cylinder: 224 Bore x 185 Stroke
Threading Pinch Roll
Pinch Roll Dia 300mmx 1750mm(Urethane Lining)
Motor 7.5Kw x 4P (1EA)
Weld Scrap Remover
Type Conveyor Belt(2EA)
Thick 10+/-0.6mm
Length: 4010+/-0.6mm
Width: 450+/-0.6mm
Roll: Dia 100 x500L (Neoprene lining) 4(EA)
Motor: 1.5Kw x 4P (1EA)
Flattener
Roll: Dia150mm x1750L
EPC (Edge Position Controller)
Centering Range: +/-150mm
No.1 Shear
Cutting thickness: 0.15~2.0mm(Off Gauge 4.5mm)
Cutting Cylinder: 2240Bore x 400 Stroke
Crop Feed Roll
Upper Roll: Dia170 x 1750L(Urethane Lining 15mm)
Bottom Roll: Dia 100 x 1750L(Urethane Lining 7.5mm)
Motor: 2.2Kw x 4P AC Motor (1Ea)
Pinch Roll: Diaz 120 x 1750L(Urethane Lining) 2 (EA)
Motor: 2.2Kw x 4P (1EA)
Crop Gate
Pass Roll: Dia 110x 1750L(Urethane Lining) 3 (EA)
Air Cylinder: 2 (EA)
|
|
|
If you didn't find what you are looking for, or need further information on a specific item, email us. |
|
